Early Winter Season
Any DISCO, same reference number, same result: your november bill, pulled from the official PITC record so you can view it, download it, or print it below.
Pick your company, then enter the reference number from your last bill:
Don't see your company listed separately, or want to check more than one bill at once? The home bill checker covers all of them.
November is when winter heating starts showing up on the bill, though usually more gently than January's full effect — most households are just beginning to use heaters and geysers more, not yet running them at winter intensity. It works the same way regardless of which company bills you — MEPCO, LESCO, FESCO, IESCO, PESCO, GEPCO, HESCO, SEPCO, QESCO, TESCO, and HAZECO all run their duplicate-bill lookup through the same PITC-backed system.
Type the 10 to 14 digit reference number printed on your last bill into the box on this page and your November statement opens for viewing, downloading, or printing. No account, no login, no charge.
November readings in hill districts can start slipping later in the cycle as weather turns, similar to the pattern seen again in January.
Outside of that, the mechanics are standard: the DISCO reads the meter, generates the bill in PITC, and it becomes searchable by reference number here within roughly two days.
Northern regions turn cold first and see heater use return in early November, while southern Punjab and Sindh often stay mild enough that November barely differs from October. If your bill jumped and you're in the north, that's expected; if you're further south, it's worth double-checking usage.
As a rule of thumb across the year: summer months (May through August) can double or triple a household's baseline consumption once AC use is factored in, winter months (November through February) push usage up through heaters and geysers, and spring and autumn (March-April, September-October) sit closest to the year's floor. Knowing where November falls in that pattern is the fastest way to tell whether a bill's size is expected or worth a closer look.
Checking a November bill takes the same four steps every time: find the reference number, choose your DISCO, enter the digits, load the bill.
The page pulls the official PITC record rather than an estimate, so the amount, due date, and arrears shown match what your DISCO has on file.
NEPRA sets a progressive slab structure for domestic consumers, and it applies to your November bill exactly as it does year-round: the first 100 units (the protected category) carry the cheapest per-unit rate, and each bracket above it — 101-200, 201-300, 301-700, and 700+ — costs more per unit than the one before. Cross a slab boundary and the bracket you land in, not just the extra units, drives the increase.
Commercial, industrial, and agricultural connections run on separate schedules from residential. Because NEPRA revises these rates quarterly, the safest way to confirm which schedule applied to your November bill is the issue date printed on it, not the month name alone.
If your unit count stayed flat but the rupee amount didn't, the Fuel Price Adjustment is the usual explanation. It tracks the real cost of the fuel used to generate power that month, so it moves with global oil, gas, and LNG prices rather than with anything you did differently — and it can land as an extra charge or, occasionally, a credit.
Layered on top of FPA and the base energy charge are a handful of standing surcharges: Financing Cost (covers sector debt servicing), a flat TV fee for residential connections, General Sales Tax on total consumption, and Tariff Rationalization. Together these typically add 15 to 30 percent to the base energy charge, which is why the bill total often moves more than the unit count alone would suggest.
Paying doesn't require the printed bill in hand — the reference number is enough for JazzCash, Easypaisa, NayaPay, or SadaPay, and for the mobile apps of most major banks (HBL, UBL, Allied Bank, Meezan, MCB), usually without a service fee. 1Link ATMs work too.
Prefer paying in person? Bank counters, Pakistan Post, and franchise outlets still take the physical bill. Miss the due date printed on it, though, and a Late Payment Surcharge of roughly 5-10 percent gets added on top.
Before heater use ramps up fully in December, November is the practical month to insulate rather than compensate — sealing gaps around doors and windows keeps a heated room warm longer per unit of electricity than running a heater harder in a drafty one.
Beyond what's specific to November, the one change that helps in every season is net metering: a rooftop solar system offsets daytime consumption year-round and can export surplus units back to the grid during peak sun hours, which is worth looking into regardless of which month you're reading this on.
Bill isn't showing up yet — if it's been fewer than 24-48 hours since the expected issue date, PITC probably hasn't received it from the DISCO yet; try again the next day rather than assuming something's broken.
Amount looks too high — the first check is always the previous month's unit count, not the rupee total. A sudden jump usually traces to a faulty meter, an estimated (not actual) reading, or an appliance that got left running; a call to your DISCO subdivision office gets a meter check scheduled.
Reference number won't work — it has to be exactly 10 to 14 digits, no letters, no spaces. Older meters occasionally get reassigned a new reference number during system upgrades, in which case your local DISCO office can confirm the current one.
Due date already passed — a Late Payment Surcharge applies from that point on and keeps accruing, so pay as soon as you can rather than waiting; letting it run risks disconnection.
Arrears showing on the bill — these are unpaid balances carried forward from earlier cycles rather than a new charge. Clearing them stops them compounding and avoids disconnection action later.
Support
Within 1-3 days on the PITC portal, once your DISCO has finalized it — it isn't instant, and there's no way to speed that part up from this side.
Not through PITC's system, no. You'll need it from a previous printed bill, an SMS alert from your DISCO, or by calling your subdivision office.
Yes — same line items, amount, due date, and taxes, pulled from the same record.
Almost always one of three things: a seasonal usage shift, an FPA adjustment, or crossing into a higher slab bracket.
Many do, since it's the same official PITC record, but confirm with the specific bank first rather than assuming.
No — the reference number is passed to PITC to render your bill in the browser, and nothing is stored on our end.
Comparing bills across the year is often the quickest way to spot whether a change is seasonal or something worth a closer look. Jump to any other month below, or use the home bill checker directly.
Each distribution company has its own landing page with office details, tariff notes, and a bill lookup specific to that DISCO.
